Home » Products » RamLloy Alloys » PVDF » PI300G6

PI300G6

Release Date: 20/05/2003

30% Glass Fiber Reinforced, High Thermal Resistance, High UV and Radiation PVDF for Injection Moulding applications.

ISO		ASTM		RELATED DOCUMENTS

THERMAL PROPERTIES	UNIT	TEST METHOD	VALUES
HDT AT LOAD 1.8 Mpa	°C	ISO-75	170

PHYSICAL PROPERTIES	UNIT	TEST METHOD	VALUES
DENSITY	g/cm³	ASTM-D792	1.95
WATER ABSORPTION (SATURATION)	%	ASTM-D570	>0.04
MOULD SHRINKAGE	%	--	0.3
MFI	g/10min	ASTM-D1238 230/5	7
MECHANICAL PROPERTIES	UNIT	TEST METHOD	VALUES
TENSILE YIELD STRENGTH	MPa	ASTM-D638	58
TENSILE MODULUS	MPa	ASTM-D638	1100
STRAIN @ BREAK	%	ASTM-D638	1.2
FLEXURAL STRENGTH	MPa	ASTM-D790	85
FLEXURAL MODULUS	MPa	ASTM-D790	6300
NOTCHED IZOD IMPACT STRENGTH +23�C	j/m	ASTM-D256	85
THERMAL PROPERTIES	UNIT	TEST METHOD	VALUES
HDT AT LOAD 1.8 Mpa	°C	ASTM D-648	170
MELTING POINT	°C	ASTM-D3417	175

The information contained in this website is supplied in good faith. However, it is given purely as an indication. It shall not be construed in any way as formal commitment or warranty on our part. Notably in respect of the eventual infringement of any rights of third parties who may use our products. We remain at your entire disposal for any further information that you may require.