Home » Products » RamSter PBT & PET

PF810

Release Date: 24/04/2008

Impact Modified PBT for Injection Moulding applications.

ISO		ASTM		RELATED DOCUMENTS

PHYSICAL PROPERTIES	UNIT	TEST METHOD	VALUES
DENSITY	g/m³	ISO-1183	1.2
MOULD SHRINKAGE	%	ISO-2577	2.1-2.3
MFI	g/10min	ISO-1133 250/2.16	20
MECHANICAL PROPERTIES	UNIT	TEST METHOD	VALUES
TENSILE YIELD STRENGTH	MPa	ISO-527	50
TENSILE MODULUS	MPa	ISO-527	2100
STRAIN @ BREAK	%	ISO-527	70
FLEXURAL STRENGTH	MPa	ISO-178	80
FLEXURAL MODULUS	MPa	ISO-178	2200
NOTCHED IZOD IMPACT STRENGTH +23�C	Kj/m²	ISO-180	8
NOTCHED IZOD IMPACT STRENGTH -30�C	Kj/m²	ISO-180	7
THERMAL PROPERTIES	UNIT	TEST METHOD	VALUES
HDT AT LOAD 1.8 Mpa	°C	ISO-75	55
HDT AT LOAD 0.45 Mpa	°C	ISO-75	120
UL FLAMMABILITY		UL-94 3mm	H.B.
MELTING POINT	°C	ISO-11357	225
ELECTRICAL PROPERTIES	UNIT	TEST METHOD	VALUES
VOLUME RESISTANCE	Ohm x m	IEC 60093	10^13
DIELECTRIC STRENGTH	kV/mm	IEC 60250	30

The information contained in this website is supplied in good faith. However, it is given purely as an indication. It shall not be construed in any way as formal commitment or warranty on our part. Notably in respect of the eventual infringement of any rights of third parties who may use our products. We remain at your entire disposal for any further information that you may require.