Home » Products » RamOfin Polypropylene

PPH300J8

Release Date: 18/06/2009

40% Glass Fiber and Glass Beads Reinforced, High Stiffness Polypropylene for Injection Moulding applications.

ISO		ASTM		RELATED DOCUMENTS

PHYSICAL PROPERTIES	UNIT	TEST METHOD	VALUES
DENSITY	g/cm³	ISO-1183	1.22
MOULD SHRINKAGE	%	ISO-2577	0.5-0.9
MFI	g/10min	ISO-1133 230/2.16	3
MECHANICAL PROPERTIES	UNIT	TEST METHOD	VALUES
TENSILE YIELD STRENGTH	MPa	ISO-527	70
STRAIN @ BREAK	%	ISO-527	3
FLEXURAL STRENGTH	MPa	ISO-178	80
FLEXURAL MODULUS	MPa	ISO-178	4500
NOTCHED IZOD IMPACT STRENGTH +23�C	Kj/m²	ISO-180	10
ROCKWELL HARDNESS		R scale	120
THERMAL PROPERTIES	UNIT	TEST METHOD	VALUES
HDT AT LOAD 1.8 Mpa	°C	ISO-75	140
HDT AT LOAD 0.45 Mpa	°C	ISO-75	150
UL FLAMMABILITY		UL-94 3mm	H.B.
MELTING POINT	°C	ISO-11357	165
MAX TEMP CONTINUOUS USE	°C		110
MAX TEMP SHORT PEAKS OPERATION	°C		140

The information contained in this website is supplied in good faith. However, it is given purely as an indication. It shall not be construed in any way as formal commitment or warranty on our part. Notably in respect of the eventual infringement of any rights of third parties who may use our products. We remain at your entire disposal for any further information that you may require.